3Demon Gen-II ARF

For glow power or electric power

Key features:
• Battery slides in under an easily removed canopy
• Laser cut, precision, wood construction

This is the 1/10 scale electric powered, radio controlled, ready to run
HPI Blitz Short-Course Race Truck with the Maxxis ATTK-10 Body.

FEATURES: Chassis: Molded composite construction with pivoting skid plates based on the E-Firestorm
Drive: Rear wheel with factory installed 3° toe block for high traction
Motor: HPI Firebolt 15, 540 size 15 turn brushed
Radio: HPI TF-1 27MHz AM 2-channel pistol grip, SF-1 standard servo, transmitter does not have charge jack
Electronic Speed Control: HPI SC-15 with reverse
Transmission: Metal gear, brushless ready
Differential: Oil-filled
Ball Bearings: Full set, rubber sealed
Suspension: Captured hinge pin type
Tires: Maxxix Trepador, D-compound 4" (102mm) diameter, 1.7" (43mm) wide
Wheels: MK10 satin chrome finish with simulated bead locks
2.4" (62mm) diameter, 1.5" (38mm) wide, 12mm hexes, 4.5mm offset
Bumpers: Front and rear high impact nylon plastic, rubber mud flaps
on rear bumpers
Shocks: Composite body, oil-filled
Body: Maxxis ATTK-10 Body trimmed and painted orange or black, see COMMENTS
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable font and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA, Canada and South America

INCLUDES: HPI Blitz Short-Course Race Truck, Maxxis ATTK-10 Body, radio system
ESC, motor, tires, wheels, body and instruction manual

REQUIRES: AA Batteries: 8 for transmitter
Battery: 6-cell NiCd or NiMH stick pack, or 2S LiPo
Battery Charger: Compatible with selected battery
Building and track equipment

SPECS: Vehicle-
Length: 21.6" (548mm)
Width: 11.6" (296mm)
Height: 7.2 - 7.9" (184 - 200mm) adjustable
Wheelbase: 12.9" (329mm) adjustable
Body-
Length: 21.4" (544mm)
Width: 9.6" (244mm) behind front wheels, narrowest point
11.3" (287mm) at rear wheels, widest point
Height: 6" (152mm)
COMMENTS: It is not possible to request a specific color when ordering because
they are supplied by the manufacturer at random.

For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
2 10x15mm Drive Gear Assembly 1 DTXC1595
4 5x10mm Gear Box 2 DTXC1535

jxs 7/24/09
ir/jxs